Demarcation

with cm-scale and big dm-numbers, to measure water-levels, anodized aluminium, watertight, extensable, scale running, thread: 5/8” Diameter: 25 mm Length: 1,00 m

with collateral handle to set tubes

for all tubes Length: 500 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of steel with forget point 1/2" conforms Ø 21 x 2,5 mm

made of plastic, for marking tubes 1/2" with spreader pin, Head: Ø 60 mm, Length: 40 mm Inscription: Vermessungspunkt

made of plastic, for marking tubes 1/2" with spreader pin, Head: Ø 60 mm, Length: 40 mm Inscription: Grenzpunkt

Size: square 60 mm Inscription: Grenzpunkt

Head: Ø 45 mm, Shaft: Ø 16 mm Inscription: Messpunkt

for plastic-tubes Head: Ø 50 mm Length: 20 mm Shaft: Ø 41 mm Inscription: +/-

for plastic-tubes Head: Ø 50 mm Length: 20 mm Shaft: Ø 41 mm Inscription: X/Y Messpunkt

65 x 65 mm Inscription: Mess-Punkt

65 x 65 mm Inscription: Grenz-Punkt

Ø 50 mm x 4,5 mm thickness

Ø 50 mm x 4,5 mm thickness

Ø 50 mm x 4,5 mm thickness

Ø 50 mm x 4,5 mm thickness

for plastictubes Ø 50 mm x 4,5 mm thickness Shaftlength: 15 mm Pointlength: 60 mm

made of red plastic Inscription: Verm.Punkt Head: Ø 30 mm Length: 120 mm

Length: 190 mm

with magnetic support

to hammer down Head: 100 x 100 x 150 mm, anodized steel in lengths as desired incl. red-tip Weight: ca. 1,5 kg Length: 400 mm

to hammer down Head: 100 x 100 x 150 mm, anodized steel in lengths as desired incl. red-tip Weight: ca. 1,5 kg Length: 500 mm

to hammer down Head: 100 x 100 x 150 mm, anodized steel in lengths as desired incl. red-tip Weight: ca. 1,5 kg Length: 600 mm

to hammer down. Head: 100 x 100 x 90 mm, anodized steel in lengths as desired incl. red-tip Weight: ca. 1,2 kg Length: 400 mm

to hammer down. Head: 100 x 100 x 90 mm, anodized steel in lengths as desired incl. red-tip Weight: ca. 1,2 kg Length: 500 mm

to hammer down. Head: 100 x 100 x 90 mm, anodized steel in lengths as desired incl. red-tip Weight: ca. 1,2 kg Length: 600 mm

Made of real tough and unbreakable plastic, weather- and UV-resistant, light-weight, with exact marking cross. Because cone fixed in the ground. Colour grey. Head: square  9 cm Bottom: square 12 cm Height: 50 cm Weight: 4,7 kg

made of perfect shaped hard-wood Size: 40 x 20 x 550 mm

made of perfect shaped hard-wood Size: 40 x 20 x 550 mm with red head

Brass, corrosion resistant. Length: 85 mm Head: Ø 75 mm with inscription, BM45

Brass, corrosion resistant. Length: 70 mm Head: Ø 50 mm with inscription, BM48

of hardened galvanized steel with flat head Ø 15 mm and centering

of hardened galvanized steel with flat head Ø 15 mm and centering

of improved galvanized steel, with centering, inscription: „Messpunkt" or „Grenzpunkt" or other

of improved galvanized steel, with centering, inscription: „Messpunkt" or „Grenzpunkt" or other

of improved galvanized steel, with centering, inscription: „Messpunkt" or „Grenzpunkt" or other

in hardened galvanized steel with half round head and centering.

in hardened galvanized steel with half round head and centering.

in hardened galvanized steel with half round head and centering.

to screw on, to glue on or to nail on, Ø 45 mm. Messpunkt

to screw on, to glue on or to nail on, Ø 45 mm. Grenzpunkt

to screw on, to glue on or to nail on, plastic, 60 mm Vermessungspunkt

Galvanized steel, with flat lenticular head, Ø 15 mm and centering.

Galvanized steel, with flat lenticular head, Ø 15 mm and centering.

Brass hard pressure casting. Can be put in with or without plug. Head: Ø 30 mm Shaft: Ø 8 mm Length: 45 mm Inscription: Mess-Punkt

Brass hard pressure casting. Can be put in with or without plug. Head: Ø 30 mm Shaft: Ø 8 mm Length: 45 mm Inscription: Vermess.-Punkt

Brass hard pressure casting. Can be put in with or without plug. Head: Ø 30 mm Shaft: Ø 8 mm Length: 45 mm Inscription: Grenz-Punkt

Corrosion resistant. Turned out of solid material, highest stability. Head: Ø 28 x  6 mm Shaft: Ø 13 x 60 mm In every shaft-length available. Brass BM21

Corrosion resistant. Turned out of solid material, highest stability. Head: Ø 28 x  6 mm Shaft: Ø 13 x 60 mm In every shaft-length available. Hard aluminium BA21

Corrosion resistant. Turned out of solid material, highest stability. Head: Ø 28 x 14 mm Shaft: Ø 13 x 60 mm In every shaft-length available. Brass BM23

Corrosion resistant. Turned out of solid material, highest stability. Head: Ø 28 x 14 mm Shaft: Ø 13 x 60 mm In every shaft-length available. Hard aluminium BA25

made of corrosion resistant aluminium. Head: Ø 20 mm x 25 mm Shaft: square 10 mm x 70 mm Weight: 40 g

made of corrosion resistant aluminium. Head: Ø 30 mm x 35 mm Shaft: square 15 mm x 90 mm Weight: 115 g

turned, made of corrosion resistant aluminium. Head: Ø 55 mm x  45 mm Shaft: Ø 33 mm x 125 mm Weight: 550 g

turned, made of special steel, Inscription on demand: Vermessung or HP Head: Ø 50 mm Shaft: Ø 35 x 110 mm Length: 160 mm Weight: 1350 g

made of aluminium. Head: Ø 30 mm x 50 mm Shaft: Ø 20 mm x 80 mm Weight: 120 g

made of aluminium. Head: Ø 50 mm x  50 mm Shaft: Ø 35 mm x 100 mm Weight: 430 g

made of aluminium. Head: Ø 55 mm x  70 mm Shaft: Ø 35 mm x 120 mm Weight: 575 g

Brass Head: Ø 24 mm x 20 mm Shaft: Ø 14 mm x 55 mm

Brass, turned out Head: Ø 20 mm x 11 mm Shaft: Ø 13 mm x 60 mm

Aluminium, tough BA27 Head: Ø 20 mm x 11 mm Shaft: Ø 13 mm x 60 mm

Brass, turned out Head: Ø 23 mm x 20 mm Shaft: Ø 15 mm x 55 mm

Aluminium, tough BA36 Head: Ø 23 mm x 20 mm Shaft: Ø 15 mm x 55 mm

Brass, turned out Head: Ø 30 mm x 35 mm Shaft: Ø 18 mm x 80 mm

Aluminium, tough BA31 Head: Ø 30 mm x 35 mm Shaft: Ø 18 mm x 80 mm

Corrosion resistant. Turned out of solid material, highest stability. In shaft-lengths as required and with female thread M8. Head: Ø 28 x 8 mm Shaft: Ø 13 x 60 mm Brass BM20

Corrosion resistant. Turned out of solid material, highest stability. In shaft-lengths as required and with female thread M8. Head: Ø 28 x 8 mm Shaft: Ø 13 x 60 mm Hard aluminium BA21

made of galvanized steel. Head diameter: 12 mm Shaft diameter:  8 mm Head length: 15 mm Shaft length: 40 mm

made of galvanized steel. Head diameter: 12 mm Shaft diameter:  8 mm Head length: 20 mm Shaft length: 50 mm

made of galvanized steel. Head diameter: 12 mm Shaft diameter:  8 mm Head length: 40 mm Shaft length: 50 mm

made of galvanized steel. Head diameter: 12 mm Shaft diameter:  8 mm Head length: 70 mm Shaft length: 50 mm

made of galvanized steel. Head diameter: 12 mm Shaft diameter:  8 mm Head length: 100 mm Shaft lenght:  50 mm

made of galvanized steel. Head diameter: 12 mm Shaft diameter:  8 mm Head length: 120 mm Shaft length:  50 mm

with cone head, galvanized steel Head diameter: 16 mm Head length: 16 mm Shaft diameter:  8 mm Shaft length: 50 mm

with cone head, galvanized steel Head diameter: 16 mm Head length: 16 mm Shaft diameter:  8 mm Shaft length: 75 mm

with cone head, galvanized steel Head diameter: 16 mm Head length: 25 mm Shaft diameter:  8 mm Shaft length: 60 mm

with cone head, galvanized steel Head diameter: 16 mm Head length: 25 mm Shaft diameter:  8 mm Shaft length: 75 mm

with tapered brass head and cranked steel-shaft. Head: Ø 20 mm x 25 mm Shaft: Ø  6 mm x 50 mm

with tapered brass head and cranked steel-shaft. Head: Ø 30 mm x 35 mm Shaft: Ø  6 mm x 65 mm

Female thread (M5) toscrew in the levelling bolt.

Head: Ø 15 mm Length: 15 mm Thread: M5

Head: Ø 15 mm Length: 15 mm Thread: M5

Ø 12 mm, length: 40 mm

made of brass Ø 13 mm. Female thread M8 for levelling bolts or adapters. In lenghts as required. Standardlength: 60 mm

made of Aluminium Ø 13 mm. Female thread M8 for levelling bolts or adapters. In lenghts as required. Standardlength: 60 mm

Brass, thread M8 Size: Ø 22 mm x 30 mm

Aluminium, thread M8 Size: Ø 22 mm x 30 mm

for facades and thermal insulation, turned, with notches, stable position, custom made lengths. Head: Ø 28 x  35 mm Shaft: Ø 20 x 200 mm Material: Brass

for facades and thermal insulation, turned, with notches, stable position, custom made lengths. Head: Ø 28 x  35 mm Shaft: Ø 20 x 200 mm Material: Aluminium

for facades and thermal insulation, turned, with notches, stable position, custom made lengths. Head: Ø 28 x  35 mm Shaft: Ø 20 x 200 mm Material: V2A

for facades and thermal insulation, turned, with notches, stable position, custom made lengths. Head: Ø 28 x  35 mm Shaft: Ø 20 x 300 mm Material: Brass

for facades and thermal insulation, turned, with notches, stable position, custom made lengths. Head: Ø 28 x  35 mm Shaft: Ø 20 x 300 mm Material: Aluminium

for facades and thermal insulation, turned, with notches, stable position, custom made lengths. Head: Ø 28 x  35 mm Shaft: Ø 20 x 300 mm Material: V2A

Spread bolt with female thread M8. Spreading while screwing. Inscription: Messpunkt Head: Ø 30 mm Shaft: Ø 12 mm x 30 mm

with thread M8. Length: 40 mm

thread M8 and 5/8"

made of stainless steel Spigot: Ø 12 mm x 30 mm With impact and female-thread M8

made of stainless steel Spigot: Ø 12 mm x 30 mm With impact and male-thread M8

made of stainless steel Spigot: Ø 12 mm x 30 mm Male-/female-thread M8, knurled

to glue, to tack or to screw on. Female thread as desired. Hemisphere Ø 28 mm, Height: 20 mm, Material: Steel

to glue, to tack or to screw on. Female thread as desired. Hemisphere Ø 28 mm, Height: 20 mm, Material: Brass

to glue, to tack or to screw on. Female thread as desired. Hemisphere Ø 28 mm, Height: 20 mm, Material: Aluminium

Made of brass, turned, female thread M10, Adjustable anchor Bolt: Ø 24 mm, L40 mm Anchor: M10, L120 mm

For sounding-pole, stainless, thread: 5/8” Size: 150 x 150 x 5 mm

Aluminiumshield for Example: 50 x 100 x 5 mm Engraving and hole as desired

Steel, to lift manhole covers Length: 600 mm With L-Hook

Steel, to lift manhole covers Length: 600 mm With U-Hook

to mark or sign, with anchor screws. Size: 50 x 50 mm

to mark or sign, with anchor screws. Size: 100 x 100 mm

to mark or sign, with anchor screws. Size: 150 x 150 mm

made of brass, with thread 5/8” and 3 holes Ø 10 mm to screw on. Size: Ø 140 x 10 mm Weight: 1,25 kg

Brass, turned, with 5/8" thread and 3 anchor screws. Size: Ø 140 mm

for firm mounting, made of steel. Every size as requested. 200 x 200 mm

Tilting base with arrestor for universal projection of inclinations and slopes. Female thread for every tripod.

made of aluminium with centering-screw, to screw on walls, height adjustable. Dimensions: 170 x 150 x 140 mm

as a very stable fixture for heavy instruments. Can be drilled or attached with a belt on pillars, lintels, constructions and corners. Instruments can be moved on the plate.

with mm-graduation, aluminium, to glue or to screw on. Length: 20 cm

self adhesive, vertical-line, precise 2 mm-E-scale Length: 300 mm (+/- 150 mm)

precise mm-scale Range: +/- 50mm

with accurate X/Y-mm-scale. Metal or plastic. Size: 110 x 110 mm Metal

with accurate X/Y-mm-scale. Metal or plastic. Size: 110 x 110 mm Plastic

to screw, tack or to stick on. Made of plastic or metal. Yellow/black. Size: 65 x 65 mm

reflecting, Ø 120 mm, red or green, plastic Available in all sizes up to 100 x 100 mm

to glue on or with hole to screw on. Diameter: 25 mm Range: app. 65 m

to glue on or with hole to screw on. Diameter: 60 mm Range: app. 100 m

to glue on or with hole to screw on. Diameter: 75 mm Range: app. 150 m

Plastic reflector with thread M 5 Diameter: 25 mm

Plastic reflector with thread M 5 Diameter: 60 mm

Plastic reflector with thread M 5 Diameter: 75 mm

Self-adhesive reflection foil with microprisms. Material thickness: 0,5 mm Size: 25 x 25 mm Range: app. 60 m

Self-adhesive reflection foil with microprisms. Material thickness: 0,5 mm Size: 50 x 50 mm Range: app. 100 m

Self-adhesive reflection foil with microprisms. Material thickness: 0,5 mm Size: 75 x 75 mm Range: app. 150 m

Self-adhesive reflection foil with microprisms. Material thickness: 0,5 mm Size: 100 x 100 mm Range: app. 250 m

Self-adhesive reflection foil with microprisms. Material thickness: 0,5 mm Size: 150 x 150 mm Range: app. 350 m

Reflection foil on aluminiumplate 1mm with holes. Size: 25 x 25 mm

Reflection foil on aluminiumplate 1mm with holes. Size: 50 x 50 mm

Reflection foil on aluminiumplate 1mm with holes. Size: 75 x 75 mm

Reflection foil on aluminiumplate 1mm with holes. Size: 100 x 100 mm

Reflection foil on aluminiumplate 1mm with holes. Size: 150 x 150 mm

made of red/white plastic, Ø 40 mm. To tack or to stick on. With line GZ 46

made of red/white plastic, Ø 40 mm. To tack or to stick on. With centering GZ 47

made of red/white plastic, Ø 40 mm. To tack or to stick on. With cross GZ 48

to tack on or to stick on. Red- or black-white plastic. Size: 75 x 40 mm GZ 50 Also in special designs

to tack on or to stick on. Red- or black-white plastic. Size: 75 x 40 mm GZ 51 Also in special designs

to tack on or to stick on. Red- or black-white plastic. Size: Ø 60 mm GZ 52 Also in special designs

made of plastic with lettering area. Size: 50 x 80 mm

made of plastic with lettering area. Size: 50 x 80 mm

with bristles Size: 50 x 80 mm

with bristles Size: 50 x 80 mm

with reflecting-target and lettering-area Size: 60 x 90 mm

with reflecting-target and lettering-area Size: 60 x 90 mm

with reflecting targets, nosing, for measurements from any position. Maße: 75 x 90 mm Height: 49 mm

with reflecting targets, nosing, for measurements from any position. Maße: 75 x 90 mm Height: 49 mm

for fast settings of references. 180 g.

Dual-component-epoxy, free from distortion, Time: 4 min, delivery: 5 packing drums with spattle and mixtureplate in bag

adjustable, to measure splits, cracks or spaces, to glue or to screw on. Exact crack-changes are shown, while moving the groundplate withscale against acrylplate with crosshair.

adjustable, to measure splits, to glue or to screw on. With installation-locker and pins, to measure the exact space with calipers.

adjustable, to measure splits in corners, to use left or right, to glue or to screw on.

to realize misalignments on floors and ground planes.

carton, bothside printed, as a journal for the deformations.

Dual-component-epoxy, free from distortion, Time: 4 min delivery: 5 packing drums with spattle and mixtureplate in bag

Calipers made of spezial-plastic, free of any distorsion. Vernier for readings of results 0,5 mm. Furthermore angle indicators on both ends. Range: -5 bis +20 mm Angle indicator: 360° Dimensions: 85 x 20 x 5 mm

to measure splits and spaces and with mm/cm-scale. Length: 165 mm

with high-grade lenses and precise measuring-scale. For exact measurements of lines, spaces, splits, edges and distances. Magnification: 7 x Scale-unit: 0,1mm Measuring-length: 20 mm View: 26 mm Size: 36 x 58 mm

with high-grade lenses and precise measuring-scale. For exact measurements of lines, spaces, splits, edges and distances. With additional illumination of scale and object, runs by batteries. Magnification: 7 x Scale-unit: 0,1mm Measuring-length: 20 mm View: 26 mm Size: 36 x 58 x 175 mm

precise and handy, to measure cracks, fissures and uneveness. Measuring range: 0 – 13 mm

Eco-friendly marking-spray, with glaring colours. Short drying time and high opacity. Content: 500 ml Sprayingcourse: 360°

Eco-friendly marking-spray, with glaring colours. Short drying time and high opacity. Content: 500 ml Sprayingcourse: 360°

with sophisticated ingredients for signs on nearly all materials. Colours: red, yellow, blue Package: 12 pce.

for Oil-Chalk Colour: black

made of PVC, with white rings. Height: 500 mm

made of PVC, with white rings. Height: 750 mm

with white, reflecting rings. Space saving. Height: 450 mm

with white, reflecting rings. Space saving. Height: 700 mm

including tripod-adaptor, one fold. Edge length: 900 mm Sign: Danger

including tripod-adaptor, one fold. Edge length: 900 mm Sign: Construction works

including tripod-adaptor, double fold. Edge length: 900 mm Sign: Danger/Vermessung

including tripod-adaptor, double fold. Edge length: 900 mm Sign: Construction works/Vermessung

made of stable profiles and plastic-coated texture. Foldable, with bag. Edge length: 70 cm Weight: 3,50 kg Sign: Danger

made of stable profiles and plastic-coated texture. Foldable, with bag. Edge length: 70 cm Weight: 3,50 kg Sign: Construction works

made of stable profiles and plastic-coated texture. Foldable, with bag. dge length: 90 cm Weight: 4,50 kg Sign: Danger

made of stable profiles and plastic-coated texture. Foldable, with bag. dge length: 90 cm Weight: 4,50 kg Sign: Construction works

orange, with reflecting stripes acc. to DIN EN 471.